Ceiling system - Hang

• WIDTH:
  • Minimum 300mm - Maximum 1000mm;
• LENGTH:
  • Minimum 300mm - Maximum 2400mm;
• 10mm increments;
• 15mm gap minimum around the panel's perimeter.

• Panels on a hang fixation (a bracket is fixed to the ceiling, and the panel's fixation hangs from this bracket). This panel is fixed and not accessible.
• If the panels are fixed within a margin, not all panels can be using a hang system, one of them needs to be at least on hinges.

Re.Wrap's acoustic solution is ideal for commercial interior environments, including workplaces, auditoriums, and hospitality. The system is installed and relocated swiftly using a simple hanging baton fixing system for walls or a magnet and cabling system for ceilings.

Installation can occur with pre or post-fit-out, and each panel is easily removable and accessible. Mid-panel inclusion cut-outs are available for power, AV and services, and White-glove installation for material protection.

Re.Wraps 100% recyclable solution uses only three materials;

• Second cycle PET panels (Polyethylene Terephthalate) made from 60% post-consumer recycled plastic bottles;
• Fabric;
• Aluminium.

Re.Wraps offers a stunning selection of standard fabrics. Project specific fabric is available subject to QC testing and quantity. 100% recyclable, Re.Wrap is made with zero adhesives and can be easily reupholstered.

Re.Wrap achieves an acoustic absorption rating of Class A. This quality makes Re.Wrap ideal for installations where wall space is at a premium and reverberation control is critical. By achieving such high and tuneable broadband absorbance values Re.Wrap requires fewer panels and resources to achieve the desired project reverberation levels.

The Re.Wrap team worked with designer Ric Frampton to develop the unique patent-pending design system, working on product iterations and manufacturing processes.

Patent Pending 2301569.6

A unique complimentary 'Take-Back' service reclaims all disused PET from the industry, including manufacturing off-cuts, damaged panels or decommissioned interior installations. The team strips out. decants and moves all PET from site to the Re.Wrap manufacturing plant in Bedfordshire for repurposing into second-cycle use.

A material circularity solution for otherwise discarded PET panels, forming a community that takes responsibility for PET waste.